BWC MEDGAS / KNOWLEDGE
Knowledge & Resources

Practical technical guidance for planning medical gas installations, selecting components and preparing accurate enquiries.

Cylinder Manifolds & Changeover

Small Medical Oxygen Cylinder Valves: ISO 407:2023 Pin-Index Yoke Connections

ISO 407:2023 covers pin-index yoke-type valve connections for small medical gas cylinders. Learn what an oxygen cylinder valve enquiry must distinguish from manifold pigtails and regulators.

Close-up photographic-style editorial visualization of a medical oxygen cylinder valve face with two locating holes, beside the matching yoke connector with two locating pins and a screw clamp.
Small medical oxygen cylinder valve and pin-index yoke interfaceBWC Medgas · AI-generated equipment illustration

Small medical oxygen cylinders are often supplied with a valve and a regulator or other gas-control equipment. In an international order, the phrase “oxygen cylinder valve” can conceal several different connector systems.

ISO 407:2023 specifically addresses pin-index yoke-type valve connections for small medical gas cylinders. Its scope is useful when determining whether the requested connection belongs to this family or to another kind of cylinder/regulator arrangement.

What does ISO 407:2023 actually cover?

The ISO 407:2023 publisher page identifies the fifth edition, published in July 2023. It covers specified pin-index yoke-type connections for medical gas cylinders, primarily associated with small cylinders.

The official abstract describes basic connection dimensions, alternative yoke-connection designs, and the positions of the holes and pins used in the connection system.

The published scope describes a working-pressure maximum of 200 bar and a test-pressure maximum of 300 bar for the connections within its scope. These values are scope limits from the standard, not cylinder-filling instructions or a recommendation for any supplied product.

The ISO page notes this connection type is primarily associated with cylinders of 5 litres or less. A buyer must still identify the specific intended cylinder and valve rather than assuming the connection solely from container volume.

Why does the pin-index arrangement matter?

The intended principle is a gas-specific mechanical connection between the cylinder valve and the mating equipment. The pin and hole layout is a defined interface feature, not a decorative or interchangeable accessory.

A regulator with a different inlet configuration cannot be accepted merely because the cylinder contains oxygen. The mating connection needs to match the exact cylinder valve standard and manufacturer documentation.

For a hospital or ambulance equipment procurement, this matters when the cylinder, valve and regulator are ordered from different suppliers.

Is a small-cylinder yoke connector a manifold pigtail?

No. The ISO 21969:2009 connection standard addresses specified high-pressure flexible connections for medical gases, including certain cylinder-to-manifold applications. A flexible cylinder-bank connection should not be conflated with the small-cylinder yoke connector described by ISO 407.

Similarly, ISO 10524-1:2018 covers specified cylinder-connected medical gas pressure regulators. It is the regulator equipment scope, not a substitute for declaring the exact cylinder-valve interface.

This separation helps avoid sourcing the right gas product with the wrong mating connection.

What information should be provided when ordering?

An effective medical cylinder accessory request includes:

  • Cylinder size and identified medical gas service.
  • Required cylinder valve type and the specified pin-index/yoke connection family.
  • The intended mating regulator or other attached equipment.
  • Exact model/dimensional drawing and the applicable standard edition.
  • Whether the order includes the cylinder body, cylinder valve, regulator or only selected accessories.
  • Quantity, required product documentation and destination project requirements.

A photograph of the full assembly can support initial identification, but the buyer should obtain the actual interface details before selecting a replacement.

What about regional approval?

A published ISO standard is a technical specification, not automatic regulatory authorisation in every country. Local requirements for cylinders, valves and associated medical devices must be checked for the destination market.

Do not assume the same connection or regulatory treatment applies to every type of portable oxygen bottle.

BWC Medgas component enquiries

For hospital oxygen supply systems, BWC's related range includes regulators and pressure instruments, manifold components and medical gas connection accessories.

State clearly whether the enquiry is for a small-cylinder yoke connection or a pipeline/cylinder-manifold component. BWC can discuss components from its supply scope against the exact specification.

Send your medical oxygen connection requirements to BWC.

Frequently asked questions

Does ISO 407 apply to every oxygen-cylinder outlet?

No. Its published scope is specifically for pin-index yoke-type valve connections.

Is a pin-index yoke connection equivalent to an ISO 21969 high-pressure flexible pigtail?

No. The technical standards describe different connection product classes.

Primary technical references

CONTACT BWC MEDGAS

Tell us what your project requires.

Share your product list or specifications and we will discuss the options.

WhatsApp