Medical gas terminal units can appear almost identical while using incompatible connector systems. Hospitals and contractors sourcing internationally should identify the actual outlet-and-probe interface rather than assuming that the country of manufacture determines compatibility.
An international standard and national connection families
ISO 9170-1:2017 covers terminal units for compressed medical gases and vacuum. It addresses gas-specific construction and performance considerations. The applicable project documents then identify the mating probe geometry and connection family.
British-style terminals
UK project specifications often reference BS 5682 probe connections alongside BS EN ISO 9170-1 terminal units and HTM 02-01 guidance. Specify the required gas and the selected BS-style connection arrangement; do not assume an arbitrary outlet will accept a BS probe.
Find British-style medical air outlet in the BWC Medgas range.
German DIN-type interfaces
German-style projects may refer to DIN connection arrangements. The DIN 13260-2 family addresses gas-specific probes and connection arrangements. A 'DIN medical gas outlet' order should include the gas service and actual connection type.
French-style AFNOR connections
French project schedules may use AFNOR-style arrangements and references such as NF S90-116. When replacing a terminal, photograph and document the mating probe and confirm the project specification.
United States connection systems
US projects may specify DISS, Ohmeda, Chemetron or another recognized connection family. These names should not be presented as synonyms. Each specified service and system has a corresponding interface configuration.
See American-style dual-gas wall outlet.
Australian medical gas projects
Australian medical gas projects refer to the adopted system specification, including AS 2896:2021 where applicable. The required terminal connection configuration should be clearly identified in the purchasing documents.
Ordering across interface families: a practical workflow
- List every gas and vacuum service.
- Identify the terminal connection family for each service.
- State whether this is a new installation or a replacement.
- For replacements, document the existing mating probe and mounting dimensions.
- Include wall, bedhead or other mounting requirements.
- Provide the relevant project drawing numbers and destination country.
- Separate items that use different connection families in the quotation.
Frequently asked questions
Is 'ISO medical gas outlet' enough detail?
No. An ISO standard reference alone may not identify the chosen national probe connection geometry.
Can an oxygen terminal be ordered by color or appearance?
Visual appearance and labeling are not substitutes for the specified gas-specific connector arrangement.
What should an international procurement team do first?
Request the project terminal schedule, then match each line to the correct gas service and interface family before comparing prices.
Reference documents
- ISO 9170-1:2017 — Terminal units
- NHS England HTM 02-01 — Medical gas pipeline systems
- Australian Standard AS 2896:2021 preview
Explore the complete medical gas outlets range.




